ISSN2456-3315
Impact Factor10.57
UGC CAREApproved
Low Cost₹599 / $45
CrossRefDOI
ESTD2016
Peer ReviewTransparent
AccessOpen
Submission: Always Open
Paper Title
COMPUTERIZE DESIGN OF MONO LEAF SPRING USING COMPOSITE MATERIAL
Authors
Suresh Chandra Gupta , Amit Kaimkuriya
Keywords
Leaf spring, Fatigue analysis, Composite materials, life cycle, Deformation
Abstract
In heavy vehicles leaf spring is used to restrict the impact shock and dump the vibration, generally they are made from steel which are very heavy. Composite materials (or composites for short) are materials made from two or more constituent materials with significantly different physical or chemical properties which remain separate and distinct on a macroscopic level within the finished structure. So to reduce the weight of leaf spring here in this work it analyzed the effect of different light weight composite material to manufacture leaf spring. In this work it considered three different composite materials that is E-glass epoxy, graphite-epoxy and carbon-epoxy composite and calculate the value of alternating equivalent stress and total deformation for each material. Finite element analysis of leaf spring was performed using Ansys, and also find out the life cycles for each material by performing fatigue analysis. It is found that E-glass epoxy composite has the highest life cycle and less deformation as compared to other materials.
Full Paper, Downloads & Preview
How To Cite
Choose the style your journal or department asks for, then copy it. Every version below is generated from this paper's own record.
IJRTI — journal style
"COMPUTERIZE DESIGN OF MONO LEAF SPRING USING COMPOSITE MATERIAL", IJRTI - International Journal for Research Trends and Innovation (www.ijrti.org), ISSN:2456-3315, Vol.4, Issue 5, page no.9 - 14, May-2019, Available :https://ijrti.org/papers/IJRTI1905003.pdf
APA — 7th edition
Gupta, S. C., & Kaimkuriya, A. (2019). COMPUTERIZE DESIGN OF MONO LEAF SPRING USING COMPOSITE MATERIAL. International Journal for Research Trends and Innovation, 4(5), 9 - 14. https://ijrti.org/viewpaperforall.php?paper=IJRTI1905003
MLA — 9th edition
Gupta, Suresh Chandra, and Amit Kaimkuriya. "COMPUTERIZE DESIGN OF MONO LEAF SPRING USING COMPOSITE MATERIAL." International Journal for Research Trends and Innovation, vol. 4, no. 5, 2019, pp. 9 - 14, https://ijrti.org/viewpaperforall.php?paper=IJRTI1905003.
Chicago — 17th, bibliography
Gupta, Suresh Chandra, and Amit Kaimkuriya. "COMPUTERIZE DESIGN OF MONO LEAF SPRING USING COMPOSITE MATERIAL." International Journal for Research Trends and Innovation 4, no. 5 (2019): 9 - 14. https://ijrti.org/viewpaperforall.php?paper=IJRTI1905003.
Harvard — author–date
Gupta, S.C. and Kaimkuriya, A. (2019) 'COMPUTERIZE DESIGN OF MONO LEAF SPRING USING COMPOSITE MATERIAL', International Journal for Research Trends and Innovation, 4(5), pp. 9 - 14. Available at: https://ijrti.org/viewpaperforall.php?paper=IJRTI1905003
IEEE — numbered reference
S. C. Gupta and A. Kaimkuriya, "COMPUTERIZE DESIGN OF MONO LEAF SPRING USING COMPOSITE MATERIAL," IJRTI, vol. 4, no. 5, pp. 9 - 14, May. 2019.
Vancouver — biomedical
Gupta SC, Kaimkuriya A. COMPUTERIZE DESIGN OF MONO LEAF SPRING USING COMPOSITE MATERIAL. IJRTI. 2019 May;4(5):9 - 14.
AMA — 11th edition
Gupta SC, Kaimkuriya A. COMPUTERIZE DESIGN OF MONO LEAF SPRING USING COMPOSITE MATERIAL. IJRTI. 2019;4(5):9 - 14. Accessed at https://ijrti.org/viewpaperforall.php?paper=IJRTI1905003
BibTeX — Zotero, Mendeley, LaTeX
@article{IJRTI1905003,
author = {Suresh Chandra Gupta and Amit Kaimkuriya},
title = {COMPUTERIZE DESIGN OF MONO LEAF SPRING USING COMPOSITE MATERIAL},
journal = {International Journal for Research Trends and Innovation},
volume = {4},
number = {5},
pages = {9 - 14},
year = {2019},
month = {May},
issn = {2456-3315},
url = {https://ijrti.org/viewpaperforall.php?paper=IJRTI1905003}
}
RIS — EndNote, RefWorks
TY - JOUR
AU - Gupta, Suresh Chandra
AU - Kaimkuriya, Amit
TI - COMPUTERIZE DESIGN OF MONO LEAF SPRING USING COMPOSITE MATERIAL
T2 - International Journal for Research Trends and Innovation
JA - IJRTI
VL - 4
IS - 5
PY - 2019
SN - 2456-3315
UR - https://ijrti.org/viewpaperforall.php?paper=IJRTI1905003
SP - 9
EP - 14
ER -
Issue
Volume 4 Issue 5,
May-2019
Pages : 9 - 14
Other Publication Details
Paper Reg. ID
IJRTI_180844
Published Paper ID
IJRTI1905003
Downloads
205,631
Research Area
Engineering
Country
indor, Madhya Pradesh, India
Published
May 2019
Published Paper PDF
https://ijrti.org/papers/IJRTI1905003.pdf
Published Paper URL
https://ijrti.org/viewpaperforall.php?paper=IJRTI1905003
About Publisher
International Journal for Research Trends and Innovation
Published by IJRTI (JW Publication)
2456-3315
ISSN
10.57
Impact Factor
2016
ESTD Year
Open
Access
Impact Factor 10.57 calculated by Google Scholar and Semantic Scholar.
An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 10.57 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator
UGC CARE Approved Journal — Transparent Peer-reviewed journal aligned with UGC’s 2025 suggestive parameters, with CrossRef DOI registration and Scopus Standard metadata on every published paper.
Licence
© 2019 — Authors hold the copyright of this article.
This work is licensed under a
Creative Commons Attribution 4.0 International License
and The Open Definition.
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0),
which permits unrestricted use, distribution and reproduction in any medium, provided the original author and source are credited.
Disclaimer:
The content, data and findings in this article are based on the authors’ research and have been
peer-reviewed for academic purposes only. Readers are advised to verify all information before practical
or commercial use. The journal and its editorial board are not liable for any errors, losses or
consequences arising from its use.
Declarations
Funding
No external funding was received for this study.
Conflict of Interest
The authors declare that they have no conflict of interest.
Acknowledgements
The authors would like to thank the reviewers and the editorial board of International Journal for Research Trends and Innovation for their careful reading and constructive comments, and all colleagues who supported the preparation of this manuscript.
